Express 1/2 Ton Van V8-5.7L VIN R (1999)
1. Ensure that the transmission is in the mechanical neutral position.
^
Rotate the transmission control lever clockwise until it reaches the full clockwise stop position.
^
Move the shift lever counterclockwise two detents.
2. Connect the shift cable end to the steering column shift controller stud ball.
3. Install the clip that secures the shift cable to the steering column bracket.
4. Feed the shift cable through the grommet hole.
5. Install the grommet.
6. Raise the vehicle. Refer to Vehicle Lifting.
7. Install the shift cable to the transmission bracket.
8. Remove the shipping tag from around the adjusting button.
