Express 1/2 Ton Van V8-5.7L VIN R (1999)
1. Lubricate the axle cavity between the seal lips and the bearing with wheel bearing lubricant. Refer to Lubrication Specifications.
2. Install the bearing using the J23690 for 8 1/2 and 8 5/8 in ring gear axles and the J29709 for 9 1/2 in ring gear axles.
3. Drive the bearing into the axle housing until the tool bottoms against the tube.
4. Install the seal using the J21128 for 8 1/2 and 8 5/8 in ring gear axles and the J29713 for 9 1/2 in ring gear axles.
5. Drive the tool into the bore until the seal bottoms flush with the tube.
Important: Carefully insert the axle shaft (7) in order not to damage the seal (9).
6. Install the axle shaft (7) into the housing (2).
7. Slide the axle shaft (7) into place allowing the splines to engage the differential side gear.
8. On axles without a locking differential, place the lock (8) on the button end of the axle shaft (7).
