Express 1/2 Ton Van V8-5.7L VIN R (1999)
Flex Plate: Service and Repair
Flywheel to Torque Converter Bolt Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the starter. Refer to Starter Motor Replacement (4.3L, 5.0L and 5.7L) in Starting and Charging.
3. Remove the converter housing access plug.
4. Mark the converter and flywheel for proper alignment for installation.
5. Remove the flywheel to converter bolts.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the flywheel to converter bolts. Hand start the bolts.