Express 1500 RWD V6-4.3L VIN X (2005)
3. Install the valve rocker arm cover onto the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the valve rocker arm cover bolts.
^
Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.).
5. Install the air conditioning compressor discharge hose, if equipped.
6. Install the air conditioning compressor suction hose, if equipped.
7. Connect the spark plug wires to the distributor cap.
8. Install the ECT gage sensor electrical connector to the bracket.
9. Connect the ECT gage sensor electrical connector.
