Express 1500 RWD V6-4.3L VIN X (2005)
47. Remove J 44466-13 (1) and J 44466-12 (2) from the metering body.
48. Remove J 44466-13 (1), clamp (2) and J 44466-11 (4) from the fuel pipe (3).
49. Install the fuel pipe (3) to the metering body.
IMPORTANT: Make sure that all of the O-rings (6 and 8), washers (7), and spacers (5) are present and in proper position.
50. Install the clamp (2) and nuts (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts to 3 N.m (27 lb ft).
51. Apply thread lock GM P/N 12345382 (Canadian P/N 10953489), or equivalent to the threads of the fuel pipe bolt (4).
52. Install the fuel pipe bolt.
Tighten the bolt to 6 N.m (53 lb ft).