Express 1500 RWD V6-4.3L VIN X (2005)
4. Push the sensor towards the rear of the vehicle to seat the sensor in the keyhole slot in the lower radiator support (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nut (1) to 10 N.m (89 lb in).
5. Connect the inflatable restraint front end sensor electrical connector.
6. Install the CP to the electrical connector.
7. Remove the safety stands and lower the vehicle.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 1.
