Express 1500 RWD V6-4.3L VIN X (2005)
Window Track: Service and Repair
Window Run Channel Replacement
Removal Procedure
1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair) .
2. Remove the front door rear garnish. Refer to Garnish Molding Replacement - Front Door Rear (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Garnish Molding Replacement - Front Door Rear) .
3. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair.
4. Lower the front door window.
5. Remove the inner window sealing strip. Refer to Sealing Strip Replacement - Front Door Upper (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Weatherstrip/Service and Repair/Sealing Strip Replacement - Front Door Upper) .
6. Remove the outer window sealing strip. Refer to Sealing Strip Replacement - Outer Belt (See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Weatherstrip/Service and Repair/Sealing Strip Replacement - Outer Belt) .
7. Remove the bolt (2) that retains the front run channel (1) to the door.
8. Remove the front run channel (1) from the door.
9. Raise the front window approximately half way in order to access the nuts that retain the front door window to the sash. Access the nuts through
the holes in the front door module.
10. Remove the nuts that retain the front door window to the sash.
11. Remove the front door window from the door from the outside of the vehicle.
12. Remove the bolt (2) that retains the rear run channel (1) to the door.
13. Remove the rear run channel (1) from the door.
Installation Procedure
1. Install the rear run channel (1) to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolt (2) in order to retain the rear run channel (1) to the door.