Express 1500 RWD V8-5.3L VIN T (2004)
3. Install the inflatable restraint front end sensor (1) into the keyhole slot in lower radiator support (2).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Push the sensor towards the rear of the vehicle to seat the sensor in the keyhole slot in the lower radiator support (2).
Tighten
Tighten the nut (1) to 10 N.m (89 lb in).
5. Connect the inflatable restraint front end sensor electrical connector.
6. Install the CP to the electrical connector.
7. Remove the safety stands and lower the vehicle.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 1.