Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Express 1500 RWD V8-5.3L VIN T (2004)

Starting and Charging > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Technical Service Bulletins > Customer Interest: > 06-02-35-001 > Jan > 06 > Ignition - Key/Ignition Lock Cylinder Will Not Turn

Page 1
background image

Ignition Switch Lock Cylinder: Customer Interest
Ignition - Key/Ignition Lock Cylinder Will Not Turn

Bulletin No.: 06-02-35-001

Date: January 05, 2006

TECHNICAL

Subject:
Ignition Key and/or Ignition Lock Cylinder Does Not Turn (Replace Ignition Key)

Models:
2003-2006 Chevrolet Express
2003-2006 GMC Savana

Condition

Some customers may comment that the ignition key and/or the ignition lock cylinder may not turn.

Cause

Bent or twisted ignition keys may cause ignition lock cylinders not to turn.

Correction

Do NOT replace ignition switch.

Replace the ignition key. Obtain blank key and cut new key for vehicle. 

If the ignition lock cylinder will not turn after the key has been replaced, replace the ignition lock cylinder. 

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

Starting and Charging > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Technical Service Bulletins > Customer Interest: > 06-02-35-001 > Jan > 06 > Ignition - Key/Ignition Lock Cylinder Will Not Turn

[PREV PAGE] [NEXT PAGE]