Express 2500 V6-4.3L VIN X (2005)
Use clean, new power steering fluid only.
12.
Fill the pump reservoir with fluid to the FULL COLD level.
13.
Attach J 43485, Power Steering Bleeder Adapter, to J 35555, Metal Mityvac, or equivalent.
14.
Place J 43485 on or in the pump reservoir filler neck.
15.
Apply a vacuum of 68 kpa (20 in Hg) maximum.
16.
Wait 1 minute.
17.
Remove 1 J43485 and J 35555.
18.
Reinstall the pump reservoir cap.
19.
Start the engine. Allow the engine to idle.
20.
Turn the steering wheel 180-360 degrees in both directions 5 times.
21.
Switch the ignition off
22.
Verify the fluid level.
23.
Release the park brake and unblock the wheels.