Express 2500 V6-4.3L VIN X (2005)
13. Remove the blower module assembly screws.
14. Remove the blower module assembly.
15. Remove the evaporator core from the evaporator and blower module assembly.
INSTALLATION PROCEDURE
1. If replacing the evaporator core, add the specified amount of PAG oil directly into the evaporator. Refer to Refrigerant System Capacities.
2. Install the evaporator.
3. Install the evaporator and blower module assembly.
4. Install the evaporator and blower module assembly retaining screws.
5. Install new O-ring seals.