Express 2500 V6-4.3L VIN X (2005)
Audible Warning Device Control Module: Removal and Replacement
Multifunction Alarm Module Replacement
Removal Procedure
1. Remove the drivers side knee bolster. Refer to Knee Bolster Bracket Replacement - Left (See: Dashboard / Instrument Panel/Service and
Repair/Knee Bolster Bracket Replacement - Left) .
2. Disconnect the multi-function audio alarm module (2) electrical connector (1).
3. Remove the multi-function audio alarm module (2) from the vehicle.
Installation Procedure
1. Install the multi-function audio alarm module (2) to the mag beam.
2. Connect the electrical connector (1) to the multi-function audio alarm module (2).
3. Install the drivers side knee bolster. Refer toKnee Bolster Bracket Replacement - Left (See: Dashboard / Instrument Panel/Service and
Repair/Knee Bolster Bracket Replacement - Left) .