Express 2500 V6-4.3L VIN X (2005)
6. Install new distributor cap screws.
Tighten the screws to 2.4 N.m (21 lb in).
7. Connect the CMP sensor harness connector.
8. Connect the spark plug wires and ignition coil wire.
9. Install the engine cover.
6. Install new distributor cap screws.
Tighten the screws to 2.4 N.m (21 lb in).
7. Connect the CMP sensor harness connector.
8. Connect the spark plug wires and ignition coil wire.
9. Install the engine cover.