Express 2500 V6-4.3L VIN X (2005)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
1. Caution: Refer to SIR Caution in Service Precautions.
Disable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
2. Put the shift lever clevis into the neutral position.
3. Remove the knee bolster.
4. Disconnect the electrical connector.
5. Use a small screwdriver to pry the A/T shift lock control actuator away from the steering column jacket assembly and the cable shift cam
assembly.
6. Remove the A/T shift lock control actuator.
Installation Procedure