Express 2500 V8-6.0L VIN U (2006)
1. Install the coolant air bleed hose (1) onto the pipe (2).
Important: Install the gaskets properly onto the pipe and covers. Position the O-ring seal onto the nipple portion of the pipe.
2. Install the gaskets onto the coolant air bleed pipe and covers.
3. Install the coolant air bleed pipe (2) and gaskets (3) onto the cylinder heads.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the coolant air bleed pipe bolts (1).
Tighten the coolant air bleed pipe bolts to 12 Nm (106 inch lbs.).
5. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
