Express 2500 V8-6.0L VIN U (2006)
Harmonic Balancer - Crankshaft Pulley: Specifications
Crankshaft Balancer Bolt - Installation Pass - to Ensure the Balancer is Completely Installed ............................................................ 330 Nm (240 ft. lbs.)
Crankshaft Balancer Bolt - First Pass - Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes .............. 50
Nm (37 ft. lbs.)
Crankshaft Balancer Bolt - Final Pass ................................................................................................................................................................. 140 degrees