Express 2500 V8-6.0L VIN U (2006)
7. Install the transmission bolt and stud on the right side until snug, If equipped with the 4L60-E automatic transmission.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the bottom bolt on the left side until snug.
1. Tighten the oil pan-to-front cover bolts to 25 Nm (18 ft. lbs.).
2. Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).
3. Tighten the converter cover, and transmission bolts/stud to 50 Nm (37 ft. lbs.).
9. Install the positive battery cable clip bolt.
Tighten the bolt to 9 Nm (80 inch lbs.).
10. Slide the channel pin into the oil pan tab.
