chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Body Side Upper Front and Rear Access Panel Weatherstrip Replacement|Page 14679 > < Body Side Upper Front and Rear Access Panel Weatherstrip Replacement|Page 14677

Express 2500 V8-6.6L DSL Turbo (2010)

Page 6
background image

1. Remove the left rear door weatherstrip from the left rear door.
2. Remove the left rear door weatherstrip retainers from the left rear door.

Installation Procedure

1. Install the left rear door weatherstrip to the left rear door.
2. Press the retainers in the left rear door weatherstrip into the holes in the left rear door.

Rear Door Weatherstrip Replacement - Right Side

Rear Door Weatherstrip Replacement - Right Side

Removal Procedure

1. Use 3M General Purpose Adhesive Cleaner 3M P/N 08987 or the equivalent, if needed, in order to remove the right rear door weatherstrip from

the top of the door.

2. Pull the right rear door weatherstrip in order to remove the weatherstrip from the channel on the side of the door.
3. Remove the right rear door weatherstrip and the retainers from the bottom of the door.
4. Clean the door of all of the old adhesive.

Installation Procedure

Body Side Upper Front and Rear Access Panel Weatherstrip Replacement|Page 14679 > < Body Side Upper Front and Rear Access Panel Weatherstrip Replacement|Page 14677