Express 2500 V8-6.6L DSL Turbo (2010)
Note: Do not remove the brake caliper guide pins unless replacement is required.
15. Slide the brake caliper (1) off of the brake caliper guide pins and the caliper bracket.
16. Inspect the brake caliper mounting and hardware for damage and wear. Refer to Rear Disc Brake Mounting and Hardware Inspection (With Single
Rear Wheel) (See: Testing and Inspection/Rear Disc Brake Mounting and Hardware Inspection (With Single Rear Wheel))Rear Disc Brake
Mounting and Hardware Inspection (With Dual Rear Wheel) (See: Testing and Inspection/Rear Disc Brake Mounting and Hardware Inspection
(With Dual Rear Wheel)).
17. Remove the brake caliper guide pin seals (1) and the brake caliper guide pin caps (2).
Installation Procedure
1. Apply a light coat of high temperature silicone brake lubricant to the brake caliper guide pin bores.
