Express 2500 V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the upper brake caliper guide pin (1) and tighten to 61 Nm (45 lb ft).
Note: The lower brake caliper guide pin is equipped with a bushing.
3. Install the lower brake caliper guide pin (2) and tighten to 61 Nm (45 lb ft).
4. Apply a light coat of high temperature silicone brake lubricant to the brake caliper guide bores and seals.
5. Install the brake caliper guide pin seals (1) and caps (2), if removed.
Ensure the brake caliper guide pin seals and caps are fully seated in the grooves of the brake caliper housing.
6. Install the rear disc brake caliper (1) to the brake caliper bracket.
Ensure the brake caliper guide pin seals are fully seated in the grooves of the brake caliper bracket.
7. Install the brake caliper bracket. Refer to Rear Brake Caliper Bracket Replacement (JH5, JH6) (See: Rear Brake Caliper Bracket Replacement
(JH5, JH6))Rear Brake Caliper Bracket Replacement (JH9) (See: Rear Brake Caliper Bracket Replacement (JH9)).
