Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the brake caliper bracket.
2. Perform the following procedure before installing the brake caliper bracket bolts.
1. Remove all traces of the original adhesive patch.
2. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
3. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the brake caliper bracket mounting bolts and tighten to 175 Nm (129 lb ft).
4. Install the brake pad springs.
Note: Install the brake pads in the same location noted during removal.
5. Install the brake pads.
6. Install the brake caliper to the bracket. Refer to Front Brake Caliper Replacement (JH5) (See: Front Brake Caliper Replacement (JH5)) Front
Brake Caliper Replacement (JH6, JH9) (See: Front Brake Caliper Replacement (JH6, JH9)).
