Express 2500 V8-6.6L DSL Turbo (2010)
Brake Fluid Reservoir: Service and Repair
Master Cylinder Reservoir Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Caution).
1. Using a suitable tool, remove the brake fluid from the brake master cylinder reservoir.
2. Discard the brake fluid into an approved container.
3. Disconnect the brake fluid level indicator switch electrical connector.
4. Remove the master cylinder reservoir bolts (1).
5. Carefully lift the master cylinder reservoir (1) straight upward and remove the reservoir from the master cylinder.
