Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the release handle and the cable to the vehicle. Install the cable using the same routing as the original cable.
2. Install the release handle to the instrument panel retainer.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the park brake release lever handle mounting bolt and tighten to 10 Nm (89 lb in).
4. Connect the cable to the retainer on the brake lever.
5. Connect the release cable to the lever.
