Express 2500 V8-6.6L DSL Turbo (2010)
9. Remove the power brake booster nuts (1).
10. Remove the power brake booster.
11. Remove the power brake booster gasket.
Inspect the power brake booster gasket for damage and replace, if necessary.
Installation Procedure
1. Install the power brake booster gasket.
2. Install the power brake booster.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the power brake booster nuts (1) and tighten to 36 Nm (27 lb ft).