Express 2500 V8-6.6L DSL Turbo (2010)
Coolant Line/Hose: Service and Repair
Engine Coolant Air Bleed Pipe Replacement
Engine Coolant Air Bleed Pipe Replacement
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement ().
2. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Static Fill)) Cooling System Draining and Filling (Vac N Fill) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Vac N Fill)) Cooling System Draining and Filling (Static Fill LGH) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Static Fill VIN L)).
3. Reposition the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
4. Remove the radiator vent inlet hose (2) from the coolant air bleed pipe fitting.
5. Remove the coolant air bleed pipe bolts (309) (intake manifold shown removed for clarity).