Express 2500 V8-6.6L DSL Turbo (2010)
4. Install the radiator outlet hose (3) to the radiator.
5. Connect the quick connect fitting on the radiator outlet hose (2) at the radiator.
6. Install the radiator outlet hose clamp (1) at surge tank using J 38185 - Hose Clamp Pliers.
7. Connect the heater hose to the radiator outlet hose.
8. Lower the vehicle.
9. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Procedures/Cooling System Draining
and Filling (Static Fill)) Cooling System Draining and Filling (Vac N Fill) (See: Service and Repair/Procedures/Cooling System Draining and
Filling (Vac N Fill)) Cooling System Draining and Filling (Static Fill LGH) (See: Service and Repair/Procedures/Cooling System Draining and
Filling (Static Fill VIN L)).
