Express 2500 V8-6.6L DSL Turbo (2010)
Turbocharger Coolant Hoses/Pipes Replacement (Feed-LMM)
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine/Tune-up and Engine Performance Checks/Air
Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
2. Remove the engine cover. Refer to Engine Cover Replacement (See: Engine/Access Cover/Service and Repair).
3. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Static Fill)) Cooling System Draining and Filling (Vac N Fill) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Vac N Fill)) Cooling System Draining and Filling (Static Fill LGH) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Static Fill VIN L)).
4. Compress the clamp (1) and disconnect the turbocharger inlet cooling hose/pipe (2) from the thermostat housing.
5. Remove the EGR cooler pipe bolt.
