Express 2500 V8-6.6L DSL Turbo (2010)
15. Install the oil pump driven gear (1).
16. Install the oil pump driven gear nut and tighten to 100 Nm (74 lb ft).
17. Install the engine front cover. Refer to Engine Front Cover Replacement (See: Timing Components/Timing Cover/Service and Repair).
18. Remove the J-44643 - tool (2).
19. Install the starter. Refer to Starter Replacement (V8) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter
Replacement (V6) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter Replacement (Diesel) (See: Starting
and Charging/Starting System/Starter Motor/Service and Repair).
20. Install the valve lifters. Refer to Valve Lifter Replacement (See: Lifter / Lash Adjuster/Service and Repair).
