Express 2500 V8-6.6L DSL Turbo (2010)
5. Remove the crankshaft balancer bolt.
6. Remove the crankshaft balancer.
Installation Procedure
1. Lightly lubricate the crankshaft balancer internal hub with engine oil.
2. Install the crankshaft balancer to the crankshaft.
3. Lightly lubricate the crankshaft balancer bolt with engine oil.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the crankshaft balancer bolt and washer.
1. Tighten the bolt a first pass to 100 Nm (74 lb ft).
2. Tighten the bolt a second pass an additional 105 degrees.