Express 2500 V8-6.6L DSL Turbo (2010)
22. Connect the engine harness electrical connectors to the fuel injectors.
23. Install the engine wiring harness to the glow plugs.
24. Install the glow plug harness bracket bolts (1) and nut (2) and tighten to 10 Nm (89 lb in).
25. Install the glow plug nuts (3) and tighten to 2 Nm (18 lb in).
26. Install the EGR cooler tube. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (See: Powertrain Management/Emission Control
Systems/Exhaust Gas Recirculation/EGR Cooler/Service and Repair/Exhaust Gas Recirculation Valve Cooler Replacement).
27. Install the generator. Refer to Generator Replacement (V6) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement)Generator Replacement (V8) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement)Generator Replacement (LMM) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement)Generator Replacement (LGH) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement).