Express 2500 V8-6.6L DSL Turbo (2010)
Drive Belt: Service and Repair
VIN L
Drive Belt Replacement
Removal Procedure
1. Remove the upper radiator fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (4.3L, 4.8L, 5.3L, 6.0L, 6.2L, 7.0L) (See:
Cooling System/Fan Shroud/Service and Repair/Engine Coolant Fan Upper Shroud Replacement) Engine Coolant Fan Upper Shroud Replacement
(Diesel) (See: Cooling System/Fan Shroud/Service and Repair/Engine Coolant Fan Upper Shroud Replacement).
2. Install a 1/2-inch breaker bar into the tensioner opening (1) and rotate the tensioner (2) counterclockwise.
3. Remove the belt from the tensioner.
4. Slowly release the tension on the tensioner arm.
5. Remove the drive belt (3) from the drive pulleys, if equipped with a single generator.
6. Remove the drive belt (1) from the drive pulleys, if equipped with dual generators (2).
