Express 2500 V8-6.6L DSL Turbo (2010)
7. Install the engine mount to engine mount bracket bolts (1) and tighten to 65 Nm (48 lb ft).
8. Lower the vehicle.
VIN 6
Engine Mount Replacement - Left Side
Removal Procedure
Caution: Refer to Engine Mounting Caution (See: Service Precautions/Engine Mounting Caution).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the engine mount to engine mount frame bracket bolts.
Caution: Refer to Engine Lifting Caution (See: Service Precautions/Engine Lifting Caution).