Express 2500 V8-6.6L DSL Turbo (2010)
7. Remove the engine mount to engine bolts (1).
8. Remove the engine mount (2).
9. Remove the engine mount bracket bolts, if necessary.
10. Remove the engine mount bracket, if necessary.
Installation Procedure
1. Position the engine mount bracket to the frame, if necessary.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the engine mount bracket bolts, if necessary. Tighten the bolts to 58 Nm (43 lb ft).
3. Position the engine mount (2) to the engine.
4. Install the engine mount to engine mount bolts (1).
5. Install the engine mount to engine bolts and tighten to 58 Nm (43 lb ft).
6. Using the adjustable jack lower the engine until the mount rests on the bracket.
