Express 2500 V8-6.6L DSL Turbo (2010)
7. Install the engine mount to engine mount bracket bolts and tighten to 65 Nm (48 lb ft).
8. Install the starter. Refer to Starter Replacement (V8) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter
Replacement (V6) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter Replacement (Diesel) (See: Starting
and Charging/Starting System/Starter Motor/Service and Repair).
9. Position the transmission oil cooler lines.
10. Connect the transmission oil cooler lines at the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection
and Connection (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Line/Hose/Service and
Repair/6L45/6L50/6L80/6L90 - Automatic Transmission/Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection).
11. Lower the vehicle.