Express 2500 V8-6.6L DSL Turbo (2010)
1. Remove the turbocharger. Refer to Turbocharger Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Turbocharger/Service and Repair/Turbocharger Replacement).
2. Remove the turbocharger oil feed pipe bolt.
3. Remove the oil feed pipe and washer.
Installation Procedure
Caution: Do not twist the turbocharger oil feed pipe. Twisting of the feed pipe will result in the collapse and deformation of the plastic pipe,
restricting oil flow and causing turbocharger damage. During turbocharger replacement, gently push the oil feed pipe towards the front of the
engine to clear the turbocharger. Assistance may be required to keep the pipes clear of the turbocharger during removal or installation.
Note: Lubricate the NEW washer with diesel fuel before installing.
1. Position the oil feed pipe and a NEW washer into place.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the oil feed pipe bolt and tighten to 34 Nm (25 lb ft).
