Express 2500 V8-6.6L DSL Turbo (2010)
11. Install the rear intake manifold tube nut (2) and tighten to 25 Nm (18 lb ft).
12. Install the 2 rear intake manifold tube bolts (3) and tighten to 25 Nm (18 lb ft).
13. Install the engine wiring harness clip bolt (1) at the rear of the intake manifold tube and tighten to 15 Nm (11 lb ft).
14. Install the positive battery cable to the IAH stud.
15. Install the positive battery cable nut at the IAH and tighten to 10 Nm (89 lb ft).
16. Position the positive battery cable boot.
17. Install the front intake manifold tube nut. Tighten the bolt to 15 Nm (11 lb ft).
