Express 2500 V8-6.6L DSL Turbo (2010)
1. Apply a 2-3 mm (1/8 in) wide, by 0.5-1.5 mm (1/16 in) high bead of sealant to the intake manifold. Refer to Adhesives, Fluids, Lubricants, and
Sealers (See: Specifications/Adhesives, Fluids, Lubricants, and Sealers).
2. Install the intake manifold.
3. Install the intake manifold bolts/nuts.
4. Install the injection pump. Refer to Fuel Injection Pump Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Fuel Injection Pump Replacement).
