Express 2500 V8-6.6L DSL Turbo (2010)
Air Duct: Service and Repair
Air Distributor Duct Replacement
Air Distributor Duct Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel Carrier Replacement).
3. Remove the air distribution duct retaining screws (2).
4. Remove the retaining screws at the instrument panel.
5. Remove the air distribution duct from the instrument panel.
Installation Procedure
1. Install the air distribution duct to the instrument panel.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the air distribution duct retaining screws (2) to the instrument panel and tighten to 4 Nm (35 lb in).
3. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel Carrier Replacement).
4. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
Auxiliary Heater Air Outlet Duct Replacement
Auxiliary Heater Air Outlet Duct Replacement
Removal Procedure
1. Remove the left rear quarter trim panel. Refer to Body Side Trim Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Side Trim Panel Replacement - Left Side).
