Express 2500 V8-6.6L DSL Turbo (2010)
7. Install the front evaporator tube to the condenser.
8. Install the front evaporator tube nut (1) to the condenser and tighten to 16 Nm (12 lb ft).
9. Install the grille. Refer to Grille Replacement (Uplevel) (See: Body and Frame/Grille/Service and Repair/Grille Replacement (Uplevel))Grille
Replacement (Base) (See: Body and Frame/Grille/Service and Repair/Grille Replacement (Base)).
10. Install the coolant recover reservoir. Refer to Coolant Recovery Reservoir Replacement (See: Engine, Cooling and Exhaust/Cooling
System/Coolant Reservoir/Service and Repair/Coolant Recovery Reservoir Replacement).
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging).
12. Leak test the fittings of the components using the J 39400-A.
Air Conditioning Evaporator Tube Replacement - Outlet (C69)
Air Conditioning Evaporator Tube Replacement - Outlet (C69)
Special Tools
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging).
2. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
3. Remove the auxiliary evaporator outlet tube (1) from the compressor hose (3).
4. Remove the retaining nut form the engine.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).