Express 2500 V8-6.6L DSL Turbo (2010)
15. Connect the low pressure sensor electrical connector (2).
16. Install the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement (See: Engine, Cooling and Exhaust/Cooling
System/Coolant Reservoir/Service and Repair/Coolant Recovery Reservoir Replacement).
17. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging).
18. Leak test the fittings of the components using the J 39400-A.