Express 2500 V8-6.6L DSL Turbo (2010)
13. Remove the thermostat housing crossover bolts (1) and nuts (2).
14. Remove the thermostat housing crossover pipe (4) and gaskets (3).
Installation Procedure
1. Position the thermostat housing crossover with NEW gaskets.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the thermostat housing crossover bolts (1) and nuts (2).Tighten to 25 Nm (18 lb ft).