Express 2500 V8-6.6L DSL Turbo (2010)
10. Remove the EGR valve temperature sensors (3). Refer to Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 1 (See:
EGR Temperature Sensor/Service and Repair/Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 1) and Exhaust Gas
Recirculation Valve Temperature Sensor Replacement - Position 2 (See: EGR Temperature Sensor/Service and Repair/Exhaust Gas
Recirculation Valve Temperature Sensor Replacement - Position 2).
11. Remove the EGR valve/cooler tube assembly bolts and nut.
12. Remove the EGR valve/cooler tube assembly (2) and gasket (1) from the engine and place on a clean work surface. Discard the gasket.
13. On the bench, remove the EGR valve to EGR cooler tube bolts (2).
14. Separate the EGR valve (3) from the EGR cooler tube (4).
15. Remove and discard the intake manifold tube gaskets (1) as required.
16. Reposition the EGR cooler hose clamp (6) and remove the EGR cooler hose (5) from the EGR cooler.
