Express 2500 V8-6.6L DSL Turbo (2010)
2. Install the EGR cooler hose (5) onto the EGR cooler tube and position the EGR cooler hose clamp (6).
3. Install NEW intake manifold tube gaskets (1) as required.
4. Position the EGR valve (3) to the EGR cooler tube (4).
5. Install the EGR valve to EGR cooler tube bolts (2) and tighten to 20 Nm (15 lb ft).
6. Install a NEW gasket (1) to the EGR valve cooler tube assembly (2)
7. Install the EGR valve/cooler tube assembly (2) to the engine.
8. Install the EGR valve/cooler tube assembly bolts and nut. Tighten the bolts to 25 Nm (18 lb ft).
9. Install the EGR Valve Temperature sensors. Refer to Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 1 (See: EGR
Temperature Sensor/Service and Repair/Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 1) and Exhaust Gas
Recirculation Valve Temperature Sensor Replacement - Position 2 (See: EGR Temperature Sensor/Service and Repair/Exhaust Gas
Recirculation Valve Temperature Sensor Replacement - Position 2).
