Express 2500 V8-6.6L DSL Turbo (2010)
Fuel Cooler: Service and Repair
Fuel Cooler Inlet Hose Replacement
VIN L
Fuel Cooler Inlet Hose Replacement
Removal Procedure
1. Drain the fuel from the filter.
2. Drain the fuel from the diesel fuel conditioning module. Refer to Water-in-Fuel Draining (See: Fuel/Water Separator/Service and
Repair/Procedures).
3. Position the hose clamps away the clamping surface.
4. Remove the hose.
Installation Procedure