Express 2500 V8-6.6L DSL Turbo (2010)
Fuel Rail: Service and Repair
Fuel Injection Fuel Rail Assembly Replacement - Bank 1
VIN L
Fuel Injection Fuel Rail Assembly Replacement - Bank 1
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Remove the exhaust gas recirculation valve cooler assembly. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (See: Emission
Control Systems/Exhaust Gas Recirculation/EGR Cooler/Service and Repair/Exhaust Gas Recirculation Valve Cooler Replacement).
3. Remove the right fuel injector feed pipes. Refer to Fuel Injection Fuel Feed Pipe Replacement - Right Side (See: Fuel Supply Line/Service and
Repair/Fuel Injection Fuel Feed Pipe Replacement - Right Side).
4. Disconnect the high pressure fuel pipes (1).