Express 2500 V8-6.6L DSL Turbo (2010)
6. Remove the fasteners (1).
7. Compress the spring clamps (2) and disconnect the hoses.
8. Remove the fuel feed pipe (3).
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the fuel feed pipe (3).
2. Compress the spring clamps (2) and connect the hoses.
3. Install the fasteners (1) and tighten to 25 Nm (18 lb ft).
