Express 2500 V8-6.6L DSL Turbo (2010)
8. Install the fuel line bracket to the stud.
9. Install the fuel line bracket nut and tighten to 16 Nm (12 lb ft).
10. Connect the fuel feed and return lines. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and Repair/Metal
Collar Quick Connect Fitting Service).
11. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
12. Start the engine. If the engine stalls, repeat the above step.
13. Once the engine starts, inspect for fuel leaks.
14. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
Fuel Feed Pipe Replacement (Chassis)
Fuel Feed Pipe Replacement (Chassis)
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Remove the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charge Air Cooler Inlet Pipe Replacement).
3. Remove the intake manifold tube. Refer to Intake Manifold Tube Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Tube Replacement).
