Express 2500 V8-6.6L DSL Turbo (2010)
Fuel Temperature Sensor: Service and Repair
VIN 6
Fuel Temperature Sensor Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Remove the charged air inlet tube. Refer to Charge Air Cooler Inlet and Outlet Duct Replacement (Inlet) (See:
Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet and Outlet Duct Replacement (Inlet)) Charge Air Cooler
Inlet and Outlet Duct Replacement (Outlet) (See: Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet and
Outlet Duct Replacement (Outlet)).
3. Remove the rear fuel line retainer and bolt.
4. Remove the fuel line retainer at center of engine.
5. Remove the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair/Glow Plug Control Module Replacement).
6. Disconnect the fuel rail temperature (FRT) sensor electrical connector.