Express 2500 V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Position the intake air valve to the IAH and install the intake air valve bolts and tighten to 20 Nm (15 lb ft).
2. Connect the engine wiring harness electrical connector (2) to the intake air valve.
3. Install the charge air cooler outlet pipe. Refer to Charge Air Cooler Inlet and Outlet Duct Replacement (Inlet) (See:
Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet and Outlet Duct Replacement (Inlet)) Charge Air Cooler
Inlet and Outlet Duct Replacement (Outlet) (See: Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet and
Outlet Duct Replacement (Outlet)).
