Express 2500 V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Position the throttle body to the intake air heater and install the throttle body bolts and tighten to 20 Nm (15 lb ft).
2. Connect the engine wiring harness electrical connector (2) to the throttle body.
3. Install the charge air cooler outlet pipe. Refer to Charge Air Cooler Outlet Pipe Replacement (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charge Air Cooler Outlet Pipe Replacement).
